# Is 35 Tint Legal in NY? (Full Guide 2024)

According to Section 375 (12-a) of the New York State Vehicle and Traffic Law, tinting on windshields or front side windows is prohibited if it darkens them excessively. Specifically, these windows must allow at least 70% of light from the outside to pass through, and the tint should not block more than 30% of the light.

New York State law prohibits window tint on the front side windows and windshield that blocks more than 30% of the light. Therefore, a 35% tint, which allows 35% of light to pass through, would not comply with the legal requirements in New York.

However, it’s crucial to note that laws and regulations may change, and it’s recommended to verify the current regulations with the New York Department of Motor Vehicles (DMV) or another official source for the most up-to-date information.

Additionally, enforcement practices can vary, and law enforcement officers may issue citations if they determine that a vehicle’s window tint exceeds legal limits.

## How Do You Calculate Tint Percentage?

The tint percentage on a car’s windows refers to the amount of visible light that the tint film allows to pass through. To calculate tint percentage, you typically measure the amount of light transmitted through the tinted window and compare it to the amount of light outside the window. The formula for calculating tint percentage is:

$\text{Tint Percentage} = \left( \frac{\text{Light Transmitted Through Tint}}{\text{Light Outside}} \right) \times 100$

In practical terms, a tint meter, a device specifically designed for measuring tint percentage, is often used. The meter is placed on the inside of the window, and it measures the amount of light passing through the glass and the tint film.

The percentage displayed on the tint meter indicates the level of tint darkness. For example, if 40% of light passes through, the tint percentage is 40%. Understanding and adhering to local regulations is crucial, as different jurisdictions may have specific laws regarding permissible tint percentages for various windows on a vehicle.

## How Do I Remove Window Tinting?

Removing window tinting can be done using a few methods, and the most common approaches involve heat and adhesive removal. One method involves using a heat source, such as a steamer or a hairdryer, to warm the tint film.

As the adhesive softens, you can carefully peel off the tint. Another method is to create a soapy water solution, apply it to the tinted surface, and then cover it with a black trash bag. The combination of sunlight and the bag’s heat can help loosen the adhesive, making it easier to peel off the tint.

For stubborn adhesive residue, a mixture of soapy water and ammonia or vinegar can be applied, followed by scraping off the residue with a razor blade or similar tool. It’s essential to work cautiously to avoid damaging the glass, and patience is key, as the process may take some time.

If unsure or uncomfortable with the process, seeking professional help from an auto detailing or tint removal service is recommended.

## Can You See Through Tinted Windows at Night?

The visibility through tinted windows at night can vary depending on the tint darkness, lighting conditions, and the type of tint film used. In general, light transmission is reduced with darker tint, potentially impacting nighttime visibility.

Tinted windows can make it more challenging to see external objects clearly, especially in low-light situations. However, modern high-quality tint films are designed to maintain good visibility while still providing the benefits of reduced glare and UV protection.

It’s crucial to comply with local regulations regarding tint darkness, as excessively dark tint can pose safety concerns, particularly at night. It’s advisable to choose a tint level that balances aesthetic preferences with practical considerations for safe driving in various lighting conditions.

## What Are the Benefits of Window Tinting?

Window tinting offers several benefits for vehicles and buildings, contributing to both comfort and functionality. Some of the key advantages include.

• Heat Rejection: Window tinting can significantly reduce the amount of heat entering a vehicle or building, helping to maintain a more comfortable interior temperature. This can be especially beneficial in hot and sunny climates.
• UV Ray Protection: Tinted windows block a substantial amount of harmful ultraviolet (UV) rays. This protection helps prevent damage to the skin, reduces the risk of skin cancer, and prevents fading of interior surfaces in cars and buildings.
• Glare Reduction: Tinted windows reduce glare from the sun and headlights, improving visibility and reducing eye strain for both drivers and occupants.
• Privacy and Security: Tinted windows provide enhanced privacy by limiting the view into the interior of a vehicle or building. This can be particularly advantageous for personal security and safeguarding belongings.
• Interior Preservation: By blocking UV rays and reducing heat, window tinting helps protect the interior of vehicles and buildings from fading, cracking, and deterioration over time.
• Energy Efficiency: In buildings, window tinting contributes to energy efficiency by reducing the need for excessive air conditioning. This can lead to lower energy consumption and cost savings.
• Enhanced Aesthetics: Tinted windows can enhance the overall appearance of a vehicle or building, providing a sleek and modern look.
• Shatter Resistance: Some types of window film add a layer of strength to the glass, making it more resistant to shattering upon impact. This can enhance safety in the event of an accident or attempted break-in.

## How Can I Get My Tint Ticket Dismissed?

Dismissal of a tint ticket typically involves addressing the reason for the citation and ensuring compliance with local regulations. Here are some general steps that may help in getting a tint ticket dismissed:

• Review Local Laws: Understand the specific tint regulations in your area. Check the permissible tint percentage for each window and ensure that your vehicle complies with these regulations.
• Document Compliance: If your tint is within legal limits, gather evidence to support your case. This might include documentation from the tint installer specifying the tint percentage or photos of your vehicle demonstrating compliance.
• Inspect Tint Meter Calibration: In some jurisdictions, law enforcement officers may use tint meters to measure the darkness of window tint. If you believe the tint meter was not calibrated correctly, you may raise this concern as part of your defense.
• Seek Professional Verification: Consider having a professional verify the tint percentage. Some automotive shops or tint specialists can provide an assessment to confirm compliance with local regulations.
• Corrective Action: If your tint is found to be non-compliant, take corrective action to bring it within legal limits. This may involve removing the tint or replacing it with one that meets the specifications.
• Attend Court: If you decide to contest the ticket, attend the scheduled court date. Present your evidence, documentation of compliance, or any other relevant information that supports your case.
• Explain Special Circumstances: If there are special circumstances, such as a medical condition that requires darker tint for UV protection, provide appropriate documentation from a medical professional to support your case.
• Legal Assistance: If you find the process challenging, consider seeking legal advice. An attorney with expertise in traffic law may provide guidance and help you navigate the legal proceedings.

## Can You Stack Tint?

Stacking tint, also known as double tinting, involves applying one layer of window tint over another. In general, it is not recommended to stack tint films on windows. Doing so can have several negative consequences:

• Reduced Visibility: Adding multiple layers of tint can significantly reduce visibility, especially at night. This can compromise the safety of the driver and occupants.
• Heat Buildup: Stacking tint layers may trap heat between the films, leading to increased temperatures within the vehicle. This can result in discomfort and may have adverse effects on the interior, including damage to electronics and upholstery.
• Adhesion Issues: The adhesive properties of the tint films may be compromised when applying one layer over another. This can result in bubbling, peeling, or uneven tint application.
• Legal Compliance: Most jurisdictions have regulations specifying the permissible darkness levels for window tint. Adding multiple layers may push the tint darkness beyond legal limits, leading to potential legal issues and citations.
• Glass Damage: Removing stacked tint films can be challenging and may damage the glass surface. This can be costly and time-consuming to repair.

## Do I Need a Tinting Certificate?

The need for a tinting certificate depends on the specific regulations in your jurisdiction. In some places, professional tinting services may issue a certificate or documentation that verifies the type and darkness of the window tint applied to a vehicle.

This certificate can serve as proof of compliance with local tinting laws and may be required for vehicle inspections or to address tint-related citations. However, not all regions mandate tinting certificates, and the absence of a certificate does not necessarily mean a violation of the law.

It’s essential to familiarize yourself with the tinting regulations in your area and, if required, obtain documentation from the tinting service to ensure compliance and avoid potential legal issues. Additionally, keeping records of the tinting specifications and adhering to local laws will contribute to a smooth and legal tinting process for your vehicle.

## What Happens if My Tint Is Too Dark?

If your window tint is too dark and exceeds the legal limits set by your local jurisdiction, you may face several consequences. Law enforcement officers may issue a citation or ticket for the illegal tint, and you could be required to pay fines.

In some cases, you may be instructed to remove or replace the overly dark tint to bring it within legal limits. Excessive tint darkness can also result in your vehicle failing inspection or being ineligible for registration.

Moreover, driving with overly dark tint may compromise visibility, increasing the risk of accidents, particularly at night. To avoid these issues, it’s essential to familiarize yourself with the tinting regulations in your area and ensure that your window tint complies with the permissible darkness levels. If you receive a citation, it’s advisable to address the situation promptly by either adjusting the tint or contesting the ticket in accordance with local laws and procedures.

## What Is the Difference Between Tint and Film?

The terms “tint” and “film” are often used interchangeably when referring to window treatments, but they can have distinct meanings in certain contexts. “Tint” commonly refers to the process of applying a thin layer of colored or shaded material to windows to reduce light transmission, glare, and heat.

This can be achieved through the use of tinted glass or the application of window tint film. On the other hand, “film” specifically denotes a thin sheet or layer of material, such as polyester or other polymer materials, that is applied to the interior or exterior of windows to achieve various effects, including tinting.

In the automotive and architectural context, the terms are frequently used together, as window tinting often involves applying tint film to achieve the desired level of darkness or color. Therefore, while tint generally refers to the outcome of reduced light transmission, film is the physical material applied to achieve that effect.

## Can I Tint My Windows?

Yes, you can typically tint your windows, but the permissibility and specific regulations vary depending on your location. Most jurisdictions have laws governing the darkness or light transmission levels allowed for window tint on vehicles and buildings.

It’s crucial to familiarize yourself with these local regulations before proceeding with window tinting. Automotive window tinting is a common practice, providing benefits such as heat reduction, UV protection, glare reduction, and enhanced privacy.

Professional tinting services can apply a thin film to the interior of vehicle windows to achieve the desired effects. For residential or commercial buildings, window tinting films can be applied to windows for similar benefits.

Always ensure that the chosen tint complies with local laws to avoid potential legal issues. If you’re unsure about the regulations, consulting with a reputable tinting service or checking with local authorities can provide guidance on permissible window tint levels in your area.

## Does WD 40 Remove Tint Glue?

While WD-40 is a versatile product with many uses, its effectiveness in removing tint glue can vary. Some people have reported success in using WD-40 to soften and remove adhesive residues left behind after removing window tint. To use WD-40 for this purpose, you can spray it onto the adhesive, let it sit for a few minutes, and then attempt to wipe or scrape off the softened residue.

However, it’s essential to exercise caution, especially on vehicle windows, as certain components of WD-40 may interact with window tint or the defrosting lines on rear windows. Before using WD-40 or any solvent, it’s advisable to test a small, inconspicuous area first to ensure that it doesn’t damage the tint or affect the glass.

Alternatively, there are dedicated adhesive removers available that are specifically designed for safely removing glue residues from surfaces, including those left behind by window tint. If you encounter difficulty with WD-40 or want to ensure the safety of your tinted windows, using a product designed for adhesive removal may be a more reliable option.

## Can You Use Ammonia to Remove Window Tint?

Yes, ammonia is a common ingredient in DIY solutions for removing window tint adhesive. A mixture of soapy water and ammonia can be applied to the tinted surface, and then a plastic trash bag is placed over the wet surface to create a barrier from air. The car is then exposed to direct sunlight, and the combination of heat and ammonia helps to soften the adhesive, making it easier to peel off the tint.

However, it’s crucial to exercise caution when using ammonia, especially on vehicle windows. Ammonia can potentially damage certain types of window tint, particularly dyed films. It’s recommended to test a small, inconspicuous area first to ensure that the tint is not adversely affected.

For those who prefer a commercial solution, there are dedicated adhesive removers available that are formulated to be safe for use on window tint. These products are designed to effectively dissolve the adhesive without harming the tint or the glass. Always follow the product instructions carefully and consider your safety and the proper ventilation of the area when working with any adhesive removal solution.

## FAQ:

### 1. Is 35 percent tint legal in New York?

In New York, the legal limit for window tint on the front side windows and windshield is not to block more than 30 percent of light. Therefore, 35 percent tint exceeds the permissible darkness for these windows.

### 2. What are the legal consequences of having 35 percent tint in New York?

Having 35 percent tint on the front side windows or windshield in New York may result in a citation, ticket, or fine. Law enforcement may enforce tint regulations, and non-compliance can lead to legal consequences.

### 3. Can I have 35 percent tint on rear windows in New York?

New York regulations are specific to the front side windows and windshield. While there are no tint restrictions for the rear windows, it’s crucial to comply with federal laws that require a certain level of light transmission.

### 4. What is the legal tint limit for rear windows in New York?

New York does not have specific tint limits for rear windows. However, federal regulations stipulate that vehicles must allow more than 70 percent of light through the combined window and tint on the rear.

### 5. How can I check if my tint complies with New York laws?

Professional tint shops can use a tint meter to measure the tint percentage on your windows. Ensure that the tint complies with the legal limits, especially for the front side windows and windshield.

### 6. Can I contest a tint ticket in New York?

Yes, you can contest a tint ticket in New York. Attend the scheduled court date, present evidence of compliance, and explain your case to contest the citation.

### 7. Are there medical exemptions for tint in New York?

New York does not provide specific medical exemptions for tint. However, individuals with certain medical conditions may consult with the DMV for possible accommodations.

### 8. Can I remove or adjust my tint to comply with the law?

Yes, you can remove or adjust your tint to comply with New York tint laws. Be sure to follow proper procedures and consult with professionals for safe removal.

### 9. Are there different tint laws for commercial vehicles in New York?

New York tint laws generally apply to all vehicles. Commercial vehicles are subject to the same regulations as non-commercial vehicles.

### 10. Where can I find the official tint laws for New York?

The New York State Department of Motor Vehicles (DMV) provides official information on tint regulations. Check their website or contact the DMV for the latest and most accurate information.